ADVERTISE YOUR WEBSITE URL HERE

Kinris5e

Bottle dryer
This machine is mainly an automatic drying device for drying the moisture on the outer wall of the bottle after filling, and then pasting the self-adhesive trademark. The machine must be matched with the conveyor line before it can run and realize automatic control.
The total length of the dryer is 2600mm. The dryer is directly placed on the conveyor line, the structure is simple, no additional equipment is required, and only manufacturers with a conveyor line (width not greater than 120mm) can use it.
This machine is designed for 380V and 220V five-wire input mode. The user can change to three-phase four-wire input according to his actual situation, but the control mode must conform to the machine's electrical control schematic, otherwise it will not work properly.
Basic parameters
1. Production capacity 30 锝?50 bottles / min
2. The maximum height of the bottle is less than or equal to 320mm, and the maximum diameter is less than or equal to 110mm
3. Bottle material: glass, ceramic, metal
4. Electric heating tube power: 1500 脳 6, length 380V \ 120W 脳 2 sets
5. Blower: 220v, 250W 脳 2 setsDrying Machine pricelist
website:http://www.tongdafillingmachinery.com/drying-machine/

  • Created: 16-09-20
  • Last Login: 17-09-20

Send Message